Products You May Like

1-pc SS Government 1/4" Guide Rod $25.99
Government Reverse Plug w/ Solid End $15.99
Melt Barrel Bushing SS - .705 Gunsmith Fit Angle Bore $24.50
EGW Solid Hammer Blue $79.99
Carry Bevel Barrel Bushing Blue - .701 OD Gunsmith Fit Straight Bore $22.50
Government Reverse Plug Keyed w/ Solid End $30.00
Carry Bevel Barrel Bushing SS - .699 OD Gunsmith Fit Angle Bore
Click to enlarge

Carry Bevel Barrel Bushing SS - .699 OD Gunsmith Fit Angle Bore

Product #: 14204
Price: $22.50
E-mail to a friend


Machined From: Stainless Steel
Finish: N/A
Flange Length: .125" 
Inner Diameter of Your Slide: .699" - this number corresponds to the outer diameter of the bushing
Outer Diameter of Your Barrel: .568" or custom bore if selected - this corresponds to the inner diameter of the bushing, we build in the tolerance
Bore Type: Angle - a tighter fit is able to be achieved due to the angle bore
Recommended Spring Plug: Long Nose (must be purchased separately)

Our Carry Bevel bushing is machined from solid barstock steel. 

The flange thickness is .125" which protects the barrel more because it sticks out farther than the spec bushing. 

Available in Stainless Steel and blued Carbon Steel. 

Gunsmith Fit is available in all O.D.'s with a .568" I.D. Straight Bore.

O.D. of the bushing = Inside diameter of your slide - usually .699" - .705"; 
I.D. of the bushing = Outside diameter of your barrel - usually .575" - .583". 

Please measure these two areas with calipers to find the sizes you need. 
Please select your options carefully. 

Please provide exact measurements, as our machinist will allow for clearance.

Check out our FAQ Section for instructions on how to accurately take these measurements. 
Angle Bore is bored on an angle or a snug fit (measurements must be precise); 
Straight Bore is bored straight without variation. 

Please allow 3 weeks for custom bored bushings. 

When choosing a spring plug, choose the EGW Long Nose Spring Plug for a flush fit!

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to

Product Reviews

Login or Register to write a review.
Reviewed by bridgeboss
08/31/2016 - 07:38:26 PM
Great Product
I don't often write reviews but when I ordered and received an angled bore bushing from EGW I was so impressed with the quality and precision of fit I just wanted to express my gratitude to the people that produce such a great product. Spoke with Cody when I called in my order who was very professional and courteous. Fits like a new pair of leather gloves, a little snug but just the right size. Thanks again for a great product and great customer service!
Reviewed by sochiemill
sochiemill bought "Carry Bevel Barrel Bushing SS - .699 OD Gunsmith Fit Angle Bore" on our website
05/13/2016 - 09:19:37 PM
Perfect Fit!!!!
I have a Springfield Armory Loaded Stainless Steel model. The factory bushing was very loose which caused the barrel to have a slight play when the slide was in battery. So I decided to purchase this bushing to tighten up the fit. Here is what I purchased: Carry Bevel Bushings Stainless Steel .699" Angle Bore
length : Standard G.I.
inner diameter : .579" (+$5.00)
I emailed and called EGW with my measurements (.701" OD) and was told that .699" Angle Bore would be ideal for my fit. Their email response was very quick.
Jim at EGW wrote "Springfield Armory’s are usually around .699 for the OD. I would just double check other than that your numbers look good and it will work great for you."
When I received the bushing, it fit perfectly. I was able to use my fingers to install this item. Tight, but not too tight. I like this since I don't have to use my barrel bushing wrench. I also purchased 13104 Spring Plug Long Nose for Thick Flange Bushing Solid End SS Checkered Front. Perfect combination.
I am so pleased with this purchase, I am going to purchase more for my other 1911. Thank you for reading my review.