Products You May Like

Monogrammed Spring Plug - SS - HD Logo $10.00
Heinie Slide Racker $24.99
Monogrammed Spring Plug - Blue - "HD Logo" $10.00
Monogrammed Spring Plug - SS - "W" $10.00
Monogrammed Spring Plug - SS - "Grenade" $10.00
Spring Plug Standard Nose with .257" Hole for Quarter Inch Guide Rod Blue $15.00
Carry Bevel Bushings Stainless Steel .701" Straight Bore
Click to enlarge

Carry Bevel Bushings Stainless Steel .701" Straight Bore

Product #: 14210
Price: $22.50

Purchase

In Stock
Standard G.I.
Commander (+$2.00)
E-mail to a friend

Description

Machined From: Stainless Steel
Finish: N/A
Flange Length: .125" 
Inner Diameter of Your Slide: .701" - this number corresponds to the outer diameter of the bushing
Outer Diameter of Your Barrel: .568" or custom bore if selected - this corresponds to the inner diameter of the bushing, we build in the tolerance
Bore Type: Straight - more clearance is built in by our machinist to allow for proper function of your firearm
Recommended Spring Plug: Long Nose (must be purchased separately)

PLEASE NOTE. IF YOU SELECT THE COMMANDERIZE OPTION THERE IS AN APPROXIMATE 2-3 WEEK LEAD TIME. 
 
Our Carry Bevel bushing is machined from solid barstock steel. 


The flange thickness is .125" which protects the barrel more because it sticks out farther than the spec bushing. 

Available in Stainless Steel and blued Carbon Steel. 

Gunsmith Fit is available in all O.D.'s with a .568" I.D. Straight Bore.

O.D. of the bushing = Inside diameter of your slide - usually .699" - .705"; 
I.D. of the bushing = Outside diameter of your barrel - usually .575" - .583". 

Please measure these two areas with calipers to find the sizes you need. 
Please select your options carefully. 

Please provide exact measurements, as our machinist will allow for clearance.

Check out our FAQ Section for instructions on how to accurately take these measurements. 
Angle Bore is bored on an angle or a snug fit (measurements must be precise); 
Straight Bore is bored straight without variation. 

Please allow 3 weeks for custom bored bushings. 

When choosing a spring plug, choose the EGW Long Nose Spring Plug for a flush fit!

Product Reviews

Login or Register to write a review.
Reviewed by GURU1951
03/05/2018 - 04:05:06 PM
TOP QUALITY BARREL BUSHING !!!!
HAVE INSTALLED 5 OF THESE OVER THE PAST SEVERAL YEARS & THE QUALITY IS FANTASTIC !!! BE SURE TO MEASURE THE OD OF THE BARREL & THE ID OF THE SLIDE BEFOREHAND. PICK THE BUSHING WHICH WILL REQUIRE THE LEAST AMOUNT OF MATERIAL TO BE REMOVED, FROM EITHER THE ID OR OD OF THE BUSHING. THIS MAKES THE INSTALL & FINAL FITTING MUCH QUICKER !!!! THE BEVELED FRONT EDGE IS AESTHETICALLY APPEALING & DOES MAKE HOLSTERING SOMEWHAT EASIER-----GURU1951, SEALY, TX.