Products You May Like

Oversized Firing Pin Stop Series 70 .45 ACP SS (Cut for Adjustable Sight) $20.00
HD Slide Stop .203" Pin 9/38/40/10 Blue $49.99
Government Round Wire Recoil Spring ISMI 1911 9 lb $7.95
1911 3" Guide Rod Kit (Fits Colt Defender, Kimber CDP/Ultra Carry) For 45 ACP Stainless $59.99 Click to view
Monogrammed Spring Plug - SS - Caspian Logo $10.00
Government Flat Wire Recoil Spring ISMI 20 lb $8.99
1-pc SS Commander 1/4" Guide Rod W/ SS Spring Plug
Click to enlarge

1-pc SS Commander 1/4" Guide Rod W/ SS Spring Plug

Product #: 10441
Price: $29.99

Purchase

In Stock
E-mail to a friend

Description

Overall Length: 3.32"
Guide Rod Diameter: .25"
Spring Plug Material: Stainless
Spring Plug Nose Length: Standard (.092")
Spring Plug Overall Length: 1.092"
Recoil Spring Type: Flat (Not Included)

The guide rod head is faced down to fit a commander gun.

EGW standard 1/4" SS spring plug is included.

The takedown hole in the guide rod allows for easy disassembly/reassembly.

This kit does not include recoil springs, but they can be purchased separately. 

Fits flush with the slide so you can turn the bushing to disassemble the gun. This guide rod also features a takedown hole.

The head of the guide rod has smooth beveled edges to make for a seamless look.

Check for fit in 3 areas: 
(1) Barrel feet should not contact head 
(2) Where guide rod rests against frame 
(3) Back surface of slide/dustcover is flat and even.





Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write a review.
Reviewed by GURU1951
03/05/2018 - 04:25:11 PM
ONE GREAT PART FOR THE COMMANDER !!!
ADD A BUFFER-PAD & A CORRECT WEIGHT RECOIL SPRING TO THIS FL-GUIDE ROD & PROMISE IT WILL "ROCK YOUR WORLD" !!! THE ROD SUPPORTS THE SPRING INSIDE THE FRAME SPRING TUNNEL & KEEPS IT ALIGNED, DURING BOTH THE COMPRESSION & RELEASE CYCLES WHEN FIRING OR SIMPLY RETRACTING THE SLIDE BY HAND. ONLY THING NEEDED IS TO CHUCK IT INTO A HAND DRILL & SPIN-POLISH WITH A PIECE OF RED CROCUS CLOTH OR FINER ABRASIVE PAPER. POLISH WITH A DAB OF "FLITZ" METAL POLISH, TO FINISH. THE SLICKER THE ROD IS, THE EASIER THE RECOIL SPRING CAN DO IT'S THING !!! A FEW OZ. OF WEIGHT WILL BE ADDED TO THE MUZZLE END OF THE SLIDE, BUT THAT'S PERFECTLY ACCEPTABLE BECAUSE IT HELPS TO DAMPEN THE AMOUNT OF MUZZLE CLIMB WHEN FIRING-DUH !!!
GURU1951, SEALY, TX.