Products You May Like

Jim Hand CNC Comp - Cone $149.99
Monogrammed Spring Plug - SS - Blank $10.00
Plunger Tube Stake-on Blue $14.99 Click to view
Mag Catch Lock Hex Head Blue $5.00
O/S Firing Pin Stop Ser 80 45 SS $20.00
EGW Ignition Kit w/ Lightened Hammer (17lb Main Spring) $134.99 Click to view
Melt Bushings Carbon Steel .705" Angle Bore
Click to enlarge

Melt Bushings Carbon Steel .705" Angle Bore

Product #: 14333
Price: $24.50

Purchase

In Stock
Standard G.I.
Commander (+$2.00)
E-mail to a friend

Description

Machined From: Carbon Steel
Finish: Blued
Flange Length: .125" 
Inner Diameter of Your Slide: .705" - this number corresponds to the outer diameter of the bushing
Outer Diameter of Your Barrel: .568" or custom bore if selected - this corresponds to the inner diameter of the bushing, we build in the tolerance
Bore Type: Angle - a tighter fit is able to be achieved due to the angle bore
Recommended Spring Plug: Long Nose (must be purchased separately)

EGW's Melt bushing is machined from solid barstock steel. 

Melt Bushings offer a unique look to the front of your 1911.

Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt bushing is too large to allow a spring plug to pull out from the front.

PLEASE NOTE. IF YOU SELECT THE COMMANDERIZE OPTION THERE IS AN APPROXIMATE 2-3 WEEK LEAD TIME. 

 
The flange thickness is .125" which protects the barrel more because it sticks out farther than the spec bushing. 

Available in Stainless Steel and blued Carbon Steel. 

Gunsmith Fit is available in all O.D.'s with a .568" I.D. Straight Bore.

O.D. of the bushing = Inside diameter of your slide - usually .699" - .705"; 
I.D. of the bushing = Outside diameter of your barrel - usually .575" - .583". 

Please measure these two areas with calipers to find the sizes you need. 
Please select your options carefully. 

Please provide exact measurements, as our machinist will allow for clearance.

Check out our FAQ Section for instructions on how to accurately take these measurements. 
Angle Bore is bored on an angle or a snug fit (measurements must be precise); 
Straight Bore is bored straight without variation. 

Please allow 3 weeks for custom bored bushings. 

When choosing a spring plug, choose the EGW Long Nose Spring Plug for a flush fit!

Product Reviews

Login or Register to write the first review.