Products You May Like

EGW Front Sight Kimber .150" $34.99
1-pc SS Commander Guide Rod 1911 $29.99
Oversized Firing Pin Stop Series 80 .45 ACP SS $20.00
HD Extractor .45 ACP Series 70 Blue $39.99
Monogrammed Spring Plug - SS - "E" $10.00
CNC 7-port 5-chamber Comp - Hybrid $149.99
Steel Feed Ramp Insert .38/.40 w/ Instructions
Click to enlarge

Steel Feed Ramp Insert .38/.40 w/ Instructions

Product #: 10151
Price: $39.99

Purchase

In Stock
E-mail to a friend

Description

Machined from: Carbon steel
Available for the following calibers: .38/.40/9mm

Instructions available here.

EGW machines steel feed ramp inserts in our shop from carbon steel to replace gouged or over polished feed ramps in aluminum and steel frames. This allows for the use of aggressive hollowpoint ammo without damage to the alloy frame or a loss of reliability.

Installation by a gunsmith is required; preferably utilizing a fresh mill equipped with a digital read out. Installation instructions are provided with the part.
EGW is no longer taking gun work and cannot install this part for you.

Note: The bullet contact point on ramped barrels is not low enough (.3”) to make a 45 reliable because the bullet hits below the feed ramp of a ramped barrel. Thus a ramped barrel is not a viable cure for aluminum frame guns whereas the EGW feed ramp insert is the reliable solution.
The set screw size for this is 6/32 x 1/4.


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.