Products You May Like

Barrel Link - 13 $6.00
Government Round Wire Recoil Spring ISMI 1911 16 lb $7.95
EGW Fiber Optic Front Sight S&W Revolver $34.99
Monogrammed Spring Plug - Blue - "Marine Corps Outline" $10.00
Mag Catch Spring GI $1.50
Monogrammed Spring Plug - SS - "D" $10.00
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount For Ruger PC Carbine
Click to enlarge

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount For Ruger PC Carbine

Product #: 49331
Price: $49.99


In Stock
E-mail to a friend


Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (3) 8-40 T10 Screws, (3) 6-48 T10 Screws
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*, UTG Reflex Micro Dot

*All ADE mounts require 6-32 x 3/8" screws.

The mounting screws require a 5/64" wrench and the T10 screws require a T10 wrench.

This mount fits:
Ruger PC Carbine (#6 screws)
Marlin 1894
(#8 screws)
Marlin 1895 (#8 screws)
Henry H009 (#8 screws)
Henry H010 (#8 screws)
Henry H014 Long Ranger (#8 screws)
Henry H006 / H012 Golden Boy (#8 screws)
Camp Carbine 9mm (#8 screws)
Camp Carbine 45 (#8 screws)

Our Ruger PC Carbine Mounts come predrilled to accommodate both of the provided #6 and #8 screws. The diameter of the hole is larger than the #6 screws provided, but this is not an issue as the mount is held in place by the conical shape of our screws, rather than resting on the shaft of the screw.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to

Product Reviews

Login or Register to write the first review.