Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for Glock $49.99
Trijicon RMR Sight Mount for Bomar $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount for CZ Shadow 2 $49.99 Click to view
Vortex Razor CZ P10C Sight Mount $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for Blank $49.99
Vortex Razor Mount for LPA $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount Blank
Click to enlarge

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount Blank

Product #: 49422
Price: $49.99

Purchase

In Stock
No
Yes, please include 4 shims for the DeltaPoint plate
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Dovetail Width: Blank
Mounting Hardware: (2) 6-32 Button Head Screws
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.


This mount is a gunsmith fit mount that needs to be machined to fit the dovetail of your choice.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.