Products You May Like

DeltaPoint Pro GI 1911 Sight Mount (fits Sheild RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro FN FNS, FNX Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
Trijicon RMR Sight Mount for FN FNS, FNX $49.99
DeltaPoint Pro Glock Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom Desert Eagle Pre 2017 Sight Mount (fits Burris FastFire and Docter) $49.99
Trijicon RMR Sight Mount for Colt Gold Cup $49.99
DeltaPoint Pro Colt 1911/22 Rail Gun (Walther Slide 22) Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima)
Click to enlarge

DeltaPoint Pro Colt 1911/22 Rail Gun (Walther Slide 22) Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima)

Product #: 49404
Price: $49.99

Purchase

In Stock
No
Yes, please include 4 shims for the DeltaPoint plate
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

This mount fits the Colt Rail Gun .22lr that has the slide made by Walther.

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide.  





Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.