Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) For Walther PPQ M2 $49.99
Trijicon RMR Sight for Colt 1911/22 Rail Gun (Walther Slide 22) $49.99
Universal Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount .468" Radius $49.99
Universal Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount .670" Radius $49.99
Trijicon RMR Sight Mount for H&K USP $49.99
Trijicon RMR Sight Mount For Sig Sauer P210A $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount For CZ 75, 75 SP-01 Phantom, 85, P01, P07, P09, and PCR
Click to enlarge

More images

Click to enlarge

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount For CZ 75, 75 SP-01 Phantom, 85, P01, P07, P09, and PCR

Product #: 49402
Price: $49.99
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.


This mount fits:
CZ 75
CZ 75 SP-01
CZ 75 SP-01 Phantom
CZ 75 SP-01 Shadow*
CZ 85
CZ P-01
CZ P-07
CZ P-09
CZ PCR

*We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide.



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.