Products You May Like

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for H&K USP $49.99 Click to view
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount For LPA-Low Mount $49.99
Trijicon RMR Sight Mount for Springfield XD $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight for Colt 1911/22 Rail Gun (Walther Slide 22) $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight for Sig P220 10MM Hunter $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight for S&W 1911 Adjustable $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for FN FNS, FNX
Click to enlarge

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for FN FNS, FNX

Product #: 49428
Price: $49.99

Purchase

In Stock
No
Yes, please include 4 shims for the DeltaPoint plate
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.


This mount does not fit the FN Five-seveN (5.7)

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.