Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount For CZ 75, 75 SP-01 Phantom, 85, P01, P07, P09, and PCR $49.99
Vortex Razor Colt Gold Cup Sight Mount $49.99
Vortex Razor Ruger PC Carbine Sight Mount $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) For Remington / Para 10mm Long Slide $49.99
Vortex Razor Mount for GI 1911 $49.99 Click to view
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for Bomar $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for S&W M&P
Click to enlarge

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for S&W M&P

Product #: 49427
Price: $49.99

Purchase

In Stock
No
Yes, please include 4 shims for the DeltaPoint plate
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.


This mount will fit:
Smith & Wesson M&P Full Size
Smith & Wesson M&P 2.0 Full Size
Smith & Wesson M&P 22 Full Size
Smith & Wesson M&P Compact*
Smith & Wesson M&P 2.0 Compact*
Smith & Wesson SD9VE
Smith & Wesson SD40VE

This mount does not fit:
Smith & Wesson M&P Shield (Our mount is too wide to fit the Shield)
Smith & Wesson M&P Shield EZ .380
Smith & Wesson SW9VE
Smith & Wesson SW40VE
Smith & Wesson M&P C.O.R.E Series
*Will not fit the M&P .22 Compact. That uses the .22 Compact specific mount found here.*

Smith and Wesson's rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

*Rear sight pusher tool highly recommended*




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.