Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for S&W M&P .22 Compact $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount Blank $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) For Desert Eagle (Post 2017) $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90) $49.99
Vortex Razor Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90-95, 97) Sight Mount $49.99 Click to view
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for Springfield XD $49.99
Trijicon RMR Desert Eagle Post 2017 Sight Mount
Click to enlarge

More images

Click to enlarge

Trijicon RMR Desert Eagle Post 2017 Sight Mount

Product #: 49534
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Trijicon RMR, Holosun HS507C, HS407C, HS508C

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

Please take note to the Pre 2017 and Post 2017 differences when placing your order.
Pre 2017 rear shelf behind the dovetail is .187"
Post 2017 rear shelf behind the dovetail is .120"

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trjicon RMR


The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write the first review.