Products You May Like

Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for LPA $49.99
Trijicon RMR Sight Mount for Novak $49.99
Trijicon RMR Sight Mount for GI 1911 $49.99
Vortex Razor Desert Eagle Post 2017 Sight Mount $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight for S&W 1911 Adjustable $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for Colt Gold Cup $49.99
Trijicon RMR Sight Mount Desert Eagle Pre 2017
Click to enlarge

More images

Click to enlarge

Trijicon RMR Sight Mount Desert Eagle Pre 2017

Product #: 49503
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Trijicon RMR, Holosun HS507C, HS407C, HS508C

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

Please take note to the Pre 2017 and Post 2017 differences when placing your order.
Pre 2017 rear shelf behind the dovetail is .187"
Post 2017 rear shelf behind the dovetail is .120"

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trjicon RMR


The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.