Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for LPA $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) For Walther PPQ .22LR $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount for Desert Eagle (Pre 2017) $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Mount for Novak $49.99
Vortex Razor Mount for Novak $49.99
Universal Vortex Razor .468" Radius Sight Mount $49.99
Trijicon RMR Sight for Colt 1911/22 Rail Gun (Walther Slide 22)
Click to enlarge

Trijicon RMR Sight for Colt 1911/22 Rail Gun (Walther Slide 22)

Product #: 49502
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Trijicon RMR, Holosun HS507C, HS407C, HS508C

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

This mount is for a Colt Rail Gun 1911 .22lr that has the Walther slide.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR.

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.