Products You May Like

Trijicon RMR Sight Mount for Kimber Fixed $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount For Walther 22 $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90) $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount For CZ P-10 C $49.99
Vortex Razor Desert Eagle Pre 2017 Sight Mount $49.99
Vortex Optics Venom 6 MOA Red Dot Sight $229.99
Trijicon RMR Sight For LPA-Low Mount
Click to enlarge

Trijicon RMR Sight For LPA-Low Mount

Product #: 49501
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR, Holosun HS507C, HS407C, HS508C

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

This mounts fits:
Baby Desert Eagle (Post 2006)
EAA Witness Elite Match

This mount does not fit:
Rock Island 1911s

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.