Products You May Like

Trijicon RMR Sight Mount for EAA Super Sight $49.99
Vortex Razor FN FNS, FNX Sight Mount $49.99
Viper/Venom Kimber Fixed Sight Mount (fits Burris FastFire and Docter) $49.99
DeltaPoint Pro S&W Revolver Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
Trijicon RMR Desert Eagle Post 2017 Sight Mount $49.99
Vortex Razor Desert Eagle Pre 2017 Sight Mount $49.99
Viper/Venom Bomar Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

More images

Click to enlarge

Viper/Venom Bomar Sight Mount (fits Burris FastFire and Docter)

Product #: 49312
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .360"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-48 Torx Head Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter

This sight fits (including but not limited to):
STI Edge (either this sight or LPA)
Les Baer 1911 (adjustable rear sights)
Colt Gold Cup Trophy with Bomar Rear Sight Cut
Colt Gold Cup National Match .45acp
Colt Gold Cup National Match 9mm
Springfield TRP Operator
Dan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide.  




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.