Products You May Like

Viper/Venom Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90-95, 97) Sight Mount (fits Burris FastFire and Docter) $49.99
Trijicon RMR Sight for Colt 1911/22 Rail Gun (Walther Slide 22) $49.99
DeltaPoint Pro Colt Gold Cup Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro S&W M&P .22 Compact Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom S&W 52 Sight Mount (fits Burris FastFire and Docter) $49.99
Viper/Venom LPA-Low Sight Mount (fits Burris FastFire and Docter) $49.99
Viper/Venom Kimber Adjustable Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

Viper/Venom Kimber Adjustable Sight Mount (fits Burris FastFire and Docter)

Product #: 49316
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

This mount fits:
Kimber 1911 (adjustable rear sights for windage and elevation)
Ruger SR1911 (adjustable rear sights for windage and elevation)


Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.