Products You May Like

Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount for Kimber Adjustable $49.99
Vortex Razor S&W Revolver Sight Mount $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) For Remington / Para 10mm Long Slide $49.99
Trijicon RMR Sight Mount for S&W M&P $49.99
Universal Vortex Viper/Venom (fits Burris FastFire and Docter) Mount .670" Radius $49.99
Leupold DeltaPoint Pro (fits JPoint, Redfield Accelerator, and Optima) Sight Mount For LPA-Low Mount $49.99
Vortex Viper/Venom (fits Burris FastFire and Docter) For LPA-Low Mount
Click to enlarge

Vortex Viper/Venom (fits Burris FastFire and Docter) For LPA-Low Mount

Product #: 49301
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .478"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*, UTG Reflex Micro Dot

The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

*All ADE mounts require 6-32 x 3/8" screws.

This mount fits:
Baby Desert Eagle (Post 2006)
EAA Witness Elite Match


Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Click here to see a video from Vortex on how to install our red dot base on a slide.  



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write a review.
Reviewed by Jasonmw1
10/30/2019 - 03:38:04 PM
Not great.
I was advised by EGW that this would fit a UTG Reflex Micro Dot but it doesn't. I was also advised that this would fit my pistol but was extremely difficult to install. Not worth the money.