Products You May Like

Viper/Venom Sig 220 10MM Hunter Sight Mount (fits Burris FastFire and Docter) $49.99
Vortex Razor Mount for GI 1911 $49.99
Trijicon RMR Sight Mount for Kimber Adjustable $49.99
Replacement Screws For Red Dot Mounts (3 Mount Screws 1 Set Screw) $4.00
Vortex Razor Mount for S&W Revolver $49.99
Vortex Razor For S&W M&P 22 Compact $49.99
DeltaPoint Pro H&K USP Sight Mount (fits JPoint, Redfield Accelerator, and Optima)
Click to enlarge

DeltaPoint Pro H&K USP Sight Mount (fits JPoint, Redfield Accelerator, and Optima)

Product #: 49406
Price: $49.99

Purchase

In Stock
No
Yes
No Thanks
Yes, Cut For USP EXPERT / ELITE (+$10.00)
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Overall Height: .335"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, Optima

DOES NOT FIT THE USP COMPACT
The USP Compact rear sight cut depth is .200"
The standard USP (for this rear sight cut) rear sight cut depth is .160" 

To fit the Expert / Elite the mount must be modified.

This mount fits:

USP Tactical 9mm
USP Tactical .45 ACP
USP 9mm
USP 40 S&W
USP .45 ACP
USP Expert (with above mentioned modification)
USP Elite (with above mentioned modification)

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.


Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide. 

Product Reviews

Login or Register to write the first review.