Products You May Like

Trijicon RMR Sight Mount for Kimber Adjustable $49.99
Viper/Venom Kimber Adjustable Sight Mount (fits Burris FastFire and Docter) $49.99 Click to view
DeltaPoint Pro Blank Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom Sig Sauer P210A Sight Mount (fits Burris FastFire and Docter) $49.99 Click to view
Trijicon RMR Sight Mount for H&K USP $49.99
Viper/Venom S&W 1911 Adjustable Sight Mount (fits Burris FastFire and Docter) $49.99 Click to view
DeltaPoint Pro Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90-95, 97) Sight Mount (fits JPoint, Redfield Accelerator, and Optima)
Click to enlarge

DeltaPoint Pro Ruger Auto (Mk 1, Mk 2, Mk 3, Mk 4, P85, P90-95, 97) Sight Mount (fits JPoint, Redfield Accelerator, and Optima)

Product #: 49420
Price: $49.99

Purchase

In Stock
No
Yes
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 X 3/16 Set Screws
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, Optima

This mount fits:
Ruger MK I
Ruger MK II
Ruger MK III
Ruger MK IV
Ruger P85
Ruger P89
Ruger P90-95
Ruger P97

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.


Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide. 

Product Reviews

Login or Register to write the first review.