Products You May Like

Viper/Venom Sig Sauer P210A Sight Mount (fits Burris FastFire and Docter) $49.99
Vortex Razor Ruger Revolver Sight Mount $49.99
DeltaPoint Pro Kimber Fixed Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) $49.99
Trijicon RMR Sight Mount For S&W 1911 Fixed $49.99
Viper/Venom GI 1911 Sight Mount (fits Burris FastFire and Docter) $49.99
Universal Viper/Venom .670" Radius Sight Mount (fits Burris FastFire and Docter) $49.99
DeltaPoint Pro Walther PPQ Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima)
Click to enlarge

DeltaPoint Pro Walther PPQ Sight Mount (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima)

Product #: 49394
Price: $49.99

Purchase

In Stock
No
Yes, please include 4 shims for the DeltaPoint plate
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws
Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima

This mount fits:
Walther PPQ Classic (M1)
Walther PPQ M2 (All Models)
Walther PPQ 45
Walther PPQ 45 SD
Walther PPQ Sub Compact
Walther P99 (All Models)
Walther PPX (All Models)
Walther Creed
Walther Creed 10 Round
Walther PPS (All Models)
Walther PPS M2 (All Models)

This mount does not fit:
Walther PPQ 22
Walther PPQ Q4 Tac
Walther Q5 Match

The PPQ sight has a hole drilled in the bottom of the dovetail to accomodate the plunger on some models of the Walthers. This plunger may also be removed from the slide if desired.


Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


Click here to see a video from Vortex on how to install our red dot base on a slide.



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.