Products You May Like

DeltaPoint Pro H&K VP9, P30, P30L, P30SK, HK45, HK45C, VP40 Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom FN FNS, FNX Sight Mount (fits Burris FastFire and Docter) $49.99
Vortex Razor Mount for Glock $49.99
Trijicon RMR Sight Mount for Sig 220 10MM Hunter $49.99 Click to view
DeltaPoint Pro S&W 52 Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro LPA-Low Mount Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
There is no image yet

More images

Click to enlarge

Trijicon RMR Sight Mount for S&W Revolver

Product #: 49519
Price: $49.99
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-48 X 1/4" Torx Screw
Red Dot Fitment: Trijicon RMR

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Our mount will fit K, L, N, and X frames.

If your revolver is not drilled and tapped this mount will not work. The best way to verify that it is/is not drilled and tapped is to open the cylinder and check the rib underneath. There should be through holes that are drilled and tapped. If there are not (like the above images) this mount will not work without you having the gun drilled and tapped.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write the first review.