Products You May Like

Vortex Razor Mount for S&W M&P $49.99
DeltaPoint Pro S&W 52 Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Trijicon RMR Sight Mount for Kimber Fixed $49.99 Click to view
Vortex Razor Mount for Ruger Revolver $49.99
Viper/Venom GI 1911 Sight Mount (fits Burris FastFire and Docter) $49.99
Replacement Screws For Red Dot Mounts (3 Mount Screws 1 Set Screw) $4.00
Viper/Venom Bomar Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

More images

Click to enlarge

Viper/Venom Bomar Sight Mount (fits Burris FastFire and Docter)

Product #: 49312
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .360"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-48 Torx Head Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

This sight fits (including but not limited to):
STI Edge (either this sight or LPA)
Les Baer 1911 (adjustable rear sights)
Colt Gold Cup Trophy with Bomar Rear Sight Cut
Colt Gold Cup National Match .45acp
Colt Gold Cup National Match 9mm
Ruger SR 1911 (adjustable rear sights)


Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write the first review.