Products You May Like

Vortex Razor For Desert Eagle Post 2017 $49.99 Click to view
DeltaPoint Pro Colt 1911/22 Rail Gun (Walther Slide 22) Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro LPA-Low Mount Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro EAA Super Sight Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom Sig 220 10MM Hunter Sight Mount (fits Burris FastFire and Docter) $49.99
Vortex Razor For Sig P220 10mm Hunter $49.99 Click to view
Viper/Venom Colt Gold Cup Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

More images

Click to enlarge

Viper/Venom Colt Gold Cup Sight Mount (fits Burris FastFire and Docter)

Product #: 49322
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Torx Head Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

The elevation screw from the original rear sight is re-used in the center hole on this mount.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

This mount fits:
Colt Gold Cup
Colt Trooper Mark 3
Colt Python
Colt Anaconda


Click here to see a video from Vortex on how to install our red dot base on a slide.  


Product Reviews

Login or Register to write the first review.