Products You May Like

Viper/Venom S&W Revolver Sight Mount (fits Burris FastFire and Docter) $49.99
Viper/Venom H&K VP9, P30, P30L, P30SK, HK45, HK45C, VP40 Sight Mount (fits Burris FastFire and Docter) $49.99
Vortex Razor Mount for Glock $49.99
DeltaPoint Pro FN FNS, FNX Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Universal Viper/Venom .468" Radius Sight Mount (fits Burris FastFire and Docter) $49.99
Trijicon RMR Sight Mount for S&W M&P $49.99
Viper/Venom Kimber Adjustable Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

Viper/Venom Kimber Adjustable Sight Mount (fits Burris FastFire and Docter)

Product #: 49316
Price: $49.99
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

This mount fits:
Kimber 1911 (adjustable rear sights for windage and elevation)
Ruger SR 1911 (adjustable rear sights for windage and elevation)


Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write the first review.