Products You May Like

Vortex Razor For Walther PPQ $49.99 Click to view
Vortex Razor For S&W 1911 $49.99 Click to view
Universal DeltaPoint Pro .670" Radius Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom CZ P10C Sight Mount (fits Burris FastFire and Docter) $49.99
DeltaPoint Pro CZ 75, 75 SP-01 Phantom, 85, P01, P07, P09, and PCR Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Trijicon RMR Sight Mount for Blank $49.99
Viper/Venom LPA-Low Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

Viper/Venom LPA-Low Sight Mount (fits Burris FastFire and Docter)

Product #: 49301
Price: $49.99

Purchase

In Stock
E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .478"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

This mount fits:
Baby Desert Eagle
EAA Witness Elite Match


Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write the first review.