Products You May Like

DeltaPoint Pro Colt Gold Cup Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Viper/Venom Blank Sight Mount (fits Burris FastFire and Docter) $49.99
DeltaPoint Pro S&W Revolver Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
DeltaPoint Pro Novak Sight Mount (fits JPoint, Redfield Accelerator, and Optima) $49.99
Vortex Razor Mount Blank $49.99
Viper/Venom Sig 220 10MM Hunter Sight Mount (fits Burris FastFire and Docter) $49.99
Viper/Venom Novak Sight Mount (fits Burris FastFire and Docter)
Click to enlarge

More images

Click to enlarge

Viper/Venom Novak Sight Mount (fits Burris FastFire and Docter)

Product #: 49311
Price: $49.99

Purchase

E-mail to a friend

Description

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Dovetail Width: .485"
Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights


The screws that are included with this mount require a 5/64'' allen wrench for installation.

Click here to see a video from Vortex on how to install our red dot base on a slide.  

Product Reviews

Login or Register to write a review.
Reviewed by bilgeibe@comcast.net
11/01/2017 - 07:15:41 PM
Works Great!
I bought this #49311 for my Colt 1911 rail gun with Novak sights. It fit too tightly at first so I filed the black finish off the front and rear of the dovetail. Then I could tap it in place with a piece of oak and a small hammer. If it fit without filing I'd give it 5 stars, but I suppose they make them oversize to fit worn or oversize dovetails. My Vortex Venom fit on this perfectly and needed very little adjustment to dial in at the range. BIG improvement in the accuracy of the gun (or rather the operator). This is an aluminum part so don't tap it with a brass or even aluminum punch. Use a piece of wood.
Reviewed by Rtarzwell
03/21/2016 - 06:28:56 AM
Perfect fit for Novak Sight Guns
This is prefect for the 1911 that has a std Novak rear sight. I have put it on a SIG Sauer 1911 Nightmare 357 Sig caliber. It was easy to slide into the rear sight from the left side without any modification to sight or gun slide. this also fits the C-More STS2 sight with no adjustments at all.