HD Remington 700, 721, 725 Long Action Picatinny Scope Mount

The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) render it useless on these two guns.

Our mount is drilled for and provided with 6-48 Torx Head screws. Some Remingtons (like the .338 Lapua) require 8-40 screws. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 1-2 weeks. Please select the screw size that you need from the list prior to adding the mount to your cart.

This mount is machined from solid 7075 Aluminum.  If you are interested in a steel mount, please see our separate listing here: http://www.egwguns.com/steel-mounts/steel-hd-remington-700-long-action-picatinny-rail-scope-mount/

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on this mount is 4.485".

This mount is available in 0, 20 and 30 MOA. Please see our FAQ section for more information on action lengths and MOA.

EGW set out on a mission to ask you, the customer, what the ideal scope mount would look like. We then incorporated these characteristics into the design of our Heavy Duty (HD) scope mount line.

This HD one-piece scope mount is precision machined from solid 7075 T6 (max hardness) aircraft grade aluminum.  This Remington Long Action mount is also available in solid pre-hardened 4140 chromoly stee for $119.99 (please see our separate listing to purchase a steel mount).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

EGW’s Heavy Duty (HD) mounts are lower in height than our tactical rails, which reduces weight and gives the shooter a better cheek weld.

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.

Add EGW’s HD Scope Rings to make it a complete package!

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Available in matte black.

Compatible with Picatinny or Weaver scope rings.

Installation: Socket head Torx® screws and wrench are included. EGW recommends a dab of blue Loctite on each screw.