Remington 700, 722, 40x Dual Ext Picatinny Rail Scope Mount

The bolt pattern on our Remington 700 mounts fit Short Action Remington 700 rifles (example 223, 308) and Long Action Remington rifles (example 30-06, 300 Win mag) as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) render it useless on these two guns.

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our short action mount is 3.625". The middle spread on our long action mount is 4.485".

Dual-extended mounts extend back past the bolt cut out as well as out the front for specific scopes that require short eye relief.

This mount is available for short and long actions, with a 0 or 20 MOA. Please see our FAQ section for more information on action lengths and MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).