Products You May Like

Mauser 98 Large Ring Picatinny Rail Scope Mount 0 MOA (Commercial) $39.99
Winchester 1300, SXP Picatinny Rail 0 MOA $29.99
HD Howa 1500 / Wby Vanguard Long Action Picatinny Rail Mount 0 MOA Ambidextrous $69.99
Remington 783 Long Action Picatinny Rail 0 MOA $39.99
HD Tikka T3X Tac A1 Picatinny Rail Scope Mount 20 MOA Ambidextrous $89.99 Click to view
Browning BLR Short Action Picatinny Rail 20 MOA $29.99
Browning BAR, BLR Long Action Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Browning BAR, BLR Long Action Picatinny Rail 0 MOA

Product #: 43500
Price: $29.99

Purchase

In Stock
No Thank you
Cut for BLR Takedown (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

Center Spread:
3.19"
Overall Length: 5.488"



Standard vs. HD rails


This mount fits:
Browning BAR (all calibers)
Browning BLR Long Action
Browning BLR Takedown*
Browning BPR
Browning Short Trac
Benelli R1 (see below)

*This mount will only work with the BLR Takedown if the modification option has been selected above.


This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This mount is available in 0 and 20 MOA. Please see our FAQ page for further information on MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.