Products You May Like

HD Howa 1500 / Wby Vanguard Short Action Picatinny Rail Mount 0 MOA Abidextrous $69.99
HD Remington 700, 722, 40x Short Action 0 MOA Picatinny Rail Scope Mount $69.99
Savage Round Back F-Class 3" Extension Short Action Picatinny Rail 20 MOA Single Load $69.99
HD Browning X-Bolt Long Action 20 MOA Picatinny Rail Scope Mount $89.99
Benelli Super Black Eagle II / M2, Franchi Affinity 3.5, Picatinny Rail 0 MOA (.336" Screws) $29.99
EGW 1in Tube Practical Aluminum Rings .750" $59.99
CVA Center Fire Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

CVA Center Fire Picatinny Rail 0 MOA

Product #: 46601
Price: $29.99

Purchase

In Stock
No Thanks
20 MOA (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included
Center Spread: 0.787"
Overall Length of Mount: 6.276"
Rearmost Screw to Breech: 1.29" (if your CVA measures .57" here you have a V2 and will need to use the V2 mount made specifically for that gun)

CVA Differences

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This mount DOES NOT WORK with the CVA Scout V2 rifles. The holes line up, but are too far rearward to mount the rail without extensive modification.
Distance from Rearmost Screw to Breech - 1.29"
Please check this distance before ordering!
There have been some issues with the newer model CVAs where the screw mounting holes are too far back. Please check to make sure your rearmost screw hole is approximately 1.29" from the breech.

This base sits at approximately 0.4” high.

if your CVA Rifle is 2010 and newer please choose our CENTERFIRE mount.

If your muzzle loader is 2009 or older, please choose our MUZZLE LOADER mount.

The CVA V2 mount is available here CVA V2.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.