Products You May Like

HD Savage Round Back Long Action (Drilled for #8-40 Screws) Picatinny Rail Scope Mount 0 MOA Ambidextrous $69.99
HD Sako TRG, M995 Picatinny Rail Mount 0 MOA Ambidextrous $69.99
Remington 700, 721, 725, Sauer 100/101 Long Action Picatinny Rail 20 MOA $39.99
Savage Rascal Picatinny Rail 0 MOA $29.99
Remington 788 Standard Action Picatinny Rail 0 MOA $39.99
Savage Round Back Short Action Picatinny Rail 20 MOA $39.99
CVA Inline, Accura Muzzleloader Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

CVA Inline, Accura Muzzleloader Picatinny Rail 0 MOA

Product #: 46600
Price: $29.99

Purchase

In Stock
No Thanks
20 MOA (+$20.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included
Center Spread: 2.361"
Overall Length of Mount: 6.67"

CVA Model Differences

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This base sits at approximately 0.4” high.

If your CVA is a 2010 or newer model, or any Centerfire, please choose our CENTERFIRE mount.

If your muzzle loader is 2009 or older, please choose our MUZZLE LOADER mount.

The CVA V2 mount is available here CVA V2.

Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.