Products You May Like

Savage 93 (1-5/8" Ejection Port) UNDRILLED Picatinny Rail 20 MOA $39.99
Browning AB3 Short Action Picatinny Rail 0 MOA $39.99
EGW 1in Tube Practical Aluminum Rings .750" $59.99
Steel HD Remington 700, 722, 40x Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous $119.99
HD Winchester 70 Long Action & All Pre 64 Model 70s Picatinny Rail 20 MOA (also fits Marlin XL7) $69.99
Ruger M77 Short Action Picatinny Rail 20 MOA (Must Drill and Tap Receiver) $39.99
HD CZ 452, 453, 455, 457, 511, 512 For 11mm Picatinny Rail Mount 20 MOA
Click to enlarge

More images

Click to enlarge

HD CZ 452, 453, 455, 457, 511, 512 For 11mm Picatinny Rail Mount 20 MOA

Product #: 80912
Price: $89.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
No Thank You
Yes Please (+$40.00)
E-mail to a friend

Description

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Hardcoat Anodized Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: #6-32 X 3/4 Screws and T-15 Bit Included
Overall Length of Mount: 5.575"
Height: Front .540"  Rear .567"
Torque Specs: 25 in/lbs
Dovetail: 11mm (measures .437" across top of dovetail)



Standard vs. HD rails

This mount will fit:
CZ 452
CZ 453
CZ 455
CZ 457 (it is about 1" shorter than the full receiver)
CZ 511
CZ 512
Sako Finnfire M94 S


This base is Right-Handed only.


It is available in 3/8" and 11mm dovetails. Determine which dovetail you have by measuring across the top of the dovetail. If you measure 0.437" you have an 11mm dovetail. If you measure 0.5" you have a 3/8" dovetail.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 25 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.