Products You May Like

Winchester 52 Small Radius .375" (for .750" Barrel) Picatinny Rail 0 MOA $39.99
Browning BLR Short Action Picatinny Rail 20 MOA $29.99
Steel HD Browning X-Bolt Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous $119.99
Silver Savage Round Back Muzzleloader Picatinny Rail 0 MOA $44.99
Winchester 70 Picatinny Rail (.375" Rear Spread) 0 MOA $39.99
Savage 93 (1-5/8" Ejection Port) Picatinny Rail Scope Mount 20 MOA Ambidextrous $39.99
HD Tikka T3 Picatinny Rail Scope Mount 20 MOA Ambidextrous
Click to enlarge

More images

Click to enlarge

HD Tikka T3 Picatinny Rail Scope Mount 20 MOA Ambidextrous

Product #: 80502
Price: $69.99

Purchase

In Stock
No Thanks
30 MOA (+$25.00)
40 MOA (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
Standard Torx Screws 6-48 X 1/4"
Metric Hex Screws 3.5 X .5"
E-mail to a friend

Description

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
Center Spread: 3.245"
Overall Length of Mount: 7.458"



Standard vs. HD rails

This mount is made specifically for the Tikka T3. 

Compatible with: 
T3x Superlite Camo
T3x Superlite
T3x Compact
T3x Lite
T3x Lite Stainless
T3x Compact Tactical Rifle
T3x Varmint
T3x Laminated Stainless
T3x Forest
T3x Hunnter Stainless
T3x Hunter
T3 Hunter
T3 Laminated Stainless
T3 Varmint
T3 Super Varmint
T3 Varmint Stainles
T3 Compact Tactical

Modification to the front of the mount is required to fit the Tikka T3X Tac A1. The mount must be cut down to fit behind the forend. Our mount is not the same height as the forend.

Our mount does not have a recoil lug.

Metric screws are only available with hex heads. Check out the Tikka FAQ page here for more info.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.