Products You May Like

Winchester 70 WSM Picatinny Rail 0 MOA $39.99
Remington 783 Short Action Picatinny Rail 0 MOA $39.99
Savage Flat Back Medium Action Picatinny Rail 20 MOA $39.99
HD Remington 700, 722, 40x Short Action 20 MOA Picatinny Rail Scope Mount $69.99
Mauser 98 Large Ring Commercial Action Picatinny Rail 20 MOA $39.99
Savage 93 (1-5/8" Ejection Port) Picatinny Rail 0 MOA $39.99
HD Winchester WSM Scope Mount 20 MOA Ambidextrous
Click to enlarge

More images

Click to enlarge

HD Winchester WSM Scope Mount 20 MOA Ambidextrous

Product #: 80612
Price: $69.99

Purchase

In Stock
No Thanks
30 MOA (+$25.00)
40 MOA (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
Center Spread: 3.514"
Overall Length of Mount: 6.670"



Standard vs. HD rails

This mount is made specifically for the Winchester 70. Please check your center spread to make sure this rail will fit your application.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35” high.

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write a review.
Reviewed by djhilty
02/05/2015 - 12:12:39 PM
Scope Mount Replacement
I decided to change the scope mount on my Winchester Model 70 Featherweight (.300 WSM). I had a two piece base mount originally on the rifle and it wasn't providing the correct eye relief for my Zeis riflescope. The EGW mount fit perfectly and gave me enough room for adjustment to correct the relief. The EGW staff were very knowledgable and helpful. I would very highly recommend this style of base for your rifle.