Products You May Like

Zastava M85 Mini Mauser, Remington 99 Picatinny Rail 0 MOA $39.99
Silver Browning BAR, BLR Long Action Picatinny Rail 0 MOA $34.99
Remington 700, 721, 725, Sauer 100/101 Long Action Picatinny Rail 0 MOA $39.99
HD CZ 452, 453, 511, 512 3/8 Picatinny Rail Scope Mount 0 MOA $89.99
HD Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, M2, Weaver 93, Stoeger M3000, Stoeger M3500 Scope Mount Ambidextrous $49.99
Marlin 1894 UNDRILLED Picatinny Rail 0 MOA $29.99 Click to view
Marlin 1895, 336, 375, 444, Model 36, Glenfield 30, Henry 3030(H009), Henry 4570(H010), Camp Carbine 9mm, Camp Carbine 45 Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Marlin 1895, 336, 375, 444, Model 36, Glenfield 30, Henry 3030(H009), Henry 4570(H010), Camp Carbine 9mm, Camp Carbine 45 Picatinny Rail 0 MOA

Product #: 47100
Price: $29.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Domestic 6
*The center spread is the distance between the two middle holes, center to center, on your receiver.
061 T6 Extruded Aluminum
Finish: Matte Black Anodized
Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included
Center Spread: 2.75"
Overall Length of Mount: 5.094"



Standard vs. HD rails

This scope base fits the following: 
Marlin 1895
Marlin 336
Marlin 375
Marlin 444
Marlin Model 36
Glenfield 30
Henry 3030(H009)
Henry 4570(H010)
Henry .410(H018) Only fits the 20" Barrel
Camp Carbine 9mm (does not fit the early models, the hole spacing is different)
Camp Carbine 45

This mount fits the same applications as the Weaver 63B.

This base sits at approximately 0.4” high. This will also fit the Camp Carbine 9mm and Camp Carbine .45 ACP.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.