Products You May Like

Mauser 98 Large Ring Commercial Action Picatinny Rail 20 MOA $39.99
Swedish Mauser M96 Small Ring Military Action UNDRILLED Picatinny Rail 20 MOA $39.99
HD Savage Round Back Short Action Picatinny Rail Scope Mount 40 MOA Ambidextrous $69.99
Silver Browning A-Bolt Long Action Picatinny Rail 0 MOA $44.99
HD Ruger American Short Action Scope Mount 20 MOA Ambidextrous $69.99
Silver Browning A-Bolt Short Action Picatinny Rail 0 MOA $44.99
Mossberg 500, 590 (pre 1997) Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Mossberg 500, 590 (pre 1997) Picatinny Rail 0 MOA

Product #: 45300
Price: $29.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Mossberg 500 (Pre-’97)
Center Spread: 2.125"
Overall Length of Mount: 5.882"



Standard vs. HD rails

*The center spread is the distance between the two middle holes, center to center, on your receiver.

All bases sit at approximately 0.4” high.

Our Mossberg 500 Pre-'97 mount comes drilled for and is provided with 6-48 screws. The late model of the mount (post-'97) is drilled for and provided with 8-40 screws.

Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.