Products You May Like

Mossberg 695 Bolt Action Shotgun Picatinny Rail 0 MOA $39.99
Savage Rascal Picatinny Rail Cut for Williams Peep Sight 0 MOA $39.99
Picatinny Rail Extrusion Black Anodized 16" Long .650" Tall $29.99
Crossbolt and Nut $8.00
Savage A17, A22 Mag Picatinny Rail 20 MOA $39.99
Winchester 1300, SXP Picatinny Rail 0 MOA $29.99
Remington 1100, 1187, V3, Versa Max Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Remington 1100, 1187, V3, Versa Max Picatinny Rail 0 MOA

Product #: 40801
Price: $29.99


In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
No Thanks
Yes, I Have A V3, Requires 3 Longer Screws .335"
Yes, I Have A Versa Max, Requires Longer Screws 3/8"
E-mail to a friend


Please review the following specs to make sure this is the mount for you:
Machined from:
 Domestic 6061 T6 Extruded Aluminum
 Matte Black 
Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs

Type of Mount: Remington 1100 / 1187 / V3
Center Spread: 1.475"
Overall Length of Mount: 5.488" 
Height: .4"

Standard vs. HD rails

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This base fits:
Remington 1100
Remington 1187
Remington V3
Remington Versa Max

Versa Max - Our .335" Overall Length Screws work in all 4 holes
V3 - 3pc 3/8" screws for the rear, 1 pc .313" Overall Length Screws for the front
1100/1187/870 - .313" Overall Length Screws for all 4 holes

Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers.

After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to

Product Reviews

Login or Register to write the first review.