Products You May Like

Browning BBR Long Action Picatinny Rail 0 MOA $39.99
NEF/H&R Handi Rifle Picatinny Rail 20 MOA $29.99
Delta Point Pro Bushings (4 Pack) $4.50
Silver Savage Round Back Short Action Picatinny Rail 20 MOA $44.99
Remington 700, 721, 725, Sauer 100/101 Long Action Picatinny Rail 0 MOA $39.99
Winchester 70 Picatinny Rail (.325" Rear Spread) 0 MOA $39.99
Remington 740, 742, 760, Ithaca 37, Weaver 62 Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Remington 740, 742, 760, Ithaca 37, Weaver 62 Picatinny Rail 0 MOA

Product #: 40700
Price: $29.99

Purchase

In Stock
No Thanks
8-40 Screws (+$10.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black 
Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs

Center Spread: 1.652"
Overall Length: 5.488"
Height: .4"



Standard vs. HD rails


The bolt pattern on this mount is made to fit the Remington 740, 742 and 760. It will also work for the Ithaca 37 and Weaver 62.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on this mount is 1.648".

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is available in 0 MOA only.

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.