Products You May Like

Remington 870 Shotgun Picatinny Rail 0 MOA $29.99
Remington 788 Long Action Picatinny Rail 0 MOA $39.99
Savage 210 Picatinny Rail Scope Mount 0 MOA Ambidextrous $39.99
HD Picatinny Rail Blank 4140 Carbon Steel 16" $139.99
HD Sako TRG, M995 Picatinny Rail Mount 0 MOA Ambidextrous $69.99
Silver Remington 700, 722, 40x Short Action Picatinny Rail 20 MOA $44.99
Remington 788 Standard Action Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Remington 788 Standard Action Picatinny Rail 0 MOA

Product #: 40400
Price: $39.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #8-40 X 1/4 T-10 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs

Center Spread: 2.993"
Overall Length: 5.882"
Height: .4"



Standard vs. HD rails


Our Remington 788 Standard Action and Long Action mounts are made specific to the guns.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our standard action mount is 3.00". The middle spread on our long action mount is 3.29".

Please review the below caliber chart to assure that you order the correct mount:

Standard Actions Calibers:
.222
.223
.22-250
.30-30

Long Actions Cailbers:
.308
.243
6mm
7mm08


This mount is available with a 0 or 20 MOA. 

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Please see our FAQ section for more information on action lengths and MOA. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).




Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.