Products You May Like

Ruger Revolver UNDRILLED Picatinny Rail 0 MOA $29.99
HD CZ 550, 602 Magnum Action Picatinny Scope Mount 20 MOA $89.99
Remington 783 Short Action Picatinny Rail 0 MOA $39.99
Ring Inserts 26mm Delrin Inserts $14.99
Ruger M77 Long Action Picatinny Rail 20 MOA (Must Drill and Tap Receiver) $39.99
Silver Tikka T3 Picatinny Rail 0 MOA $44.99
Silver Ruger 10/22 Picatinny Rail 20 MOA
Click to enlarge

More images

Click to enlarge

Silver Ruger 10/22 Picatinny Rail 20 MOA

Product #: 46112
Price: $44.99

Purchase

In Stock
No Thanks
30 MOA (+$25.00)
40 MOA (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Center Spread: 2.57"
Overall Length: 6.276"



Standard vs. HD rails


Our Ruger 10-22 mount is made specific to the gun. 

This scope mount will not fit the 10-22 takedown. Our 10-22 Takedown mount is available here.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This base sits at approximately 0.4” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.