Products You May Like

Thompson/Center Dimension Picatinny Rail 20 MOA $39.99
Steel HD Remington 700, 722, 40x Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous $119.99
Ruger 10/22 Takedown Picatinny Rail 10 MOA $29.99
HD Dual Ext. Remington Short Action Picatinny Rail Scope Mount 20 MOA $89.99
EGW 30mm Practical Aluminum Rings .840" $59.99
Remington 700, 721, 725, Sauer 100/101 Long Action Picatinny Rail 20 MOA $39.99
Silver Smith & Wesson Revolver Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Silver Smith & Wesson Revolver Picatinny Rail 0 MOA

Product #: 49104
Price: $34.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

The bolt pattern on this mount fits factory drilled Smith & Wesson revolvers. The mount is also available undrilled, to accommodate unconventional bolt patterns.

Swing the cylinder out on your gun and look under the top strap. If you see the holes under the sight, through the top strap, your gun is factory drilled and tapped. Our mount fits snugly into the rear sight cut and has a recoil shoulder, unlike some mounts that are simply radiused to fit the top radius and do not go into the rear sight cut.

If your top strap is not already drilled and tapped (pictured above), our mount will not work with your gun. You can have a competent and qualified gunsmith drill and tap the top strap with the standard S&W hole pattern which will allow you to use our mount.


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Our mount will fit K, L, N, and X frames.
Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is available in 0 MOA only.

This mount is available black or silver anodized. Please select the finish that you would like.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.