Products You May Like

HD Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous $69.99
Crossbolt and Nut $8.00
EGW 30mm Practical Aluminum Rings .840" $59.99
Savage 93 (1-5/8" Ejection Port) Picatinny Rail Scope Mount 0 MOA Silver Ambidextrous $44.99
HD Remington 700 Long Action F-Class Scope Mount 0 MOA $89.99
Mauser 98 Large Ring Military Action UNDRILLED Picatinny Rail 20 MOA $39.99
Savage 220 Slug Gun Shortened Front Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Savage 220 Slug Gun Shortened Front Picatinny Rail 0 MOA

Product #: 41101
Price: $39.99


In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend


Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 T-10 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs

Center Spread: 4.630"
Overall Length: 6.850"

This mount pairs well with our 1" Tall 1" Tube Practical Rings. These rings are made specifically for the shorter tube shotgun scopes like the Nikon Prostaff.

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount does NOT fit the 212
The 212 mount is available here

The middle spread is the distance between the two middle holes, center to center, on your receiver.

We made this mount specifically for the 220 Slug Gun.

We took our Long Action mount and shortened it to allow for the use of a shotgun scope. This should alleviate issues with the bell hitting the front of the scope mount on the regular Savage Long Action Scope Mount.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW’'s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’'s Practical or HD Scope Rings to make it a complete overhaul!

Available in matte black.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Product Reviews

Login or Register to write a review.
Reviewed by ordtech
08/13/2016 - 08:30:53 PM
EGW Base for Savage 220
EGW bases are an excellent choice for a rock solid base and max flexibility for perfect eye relief. I have them on two other guns and have not had any problems. On the Savage 220 I mounted a Nikon 3 x 9 X 40 BDC 200 (A short scope) and needed high rings to clear the front four lugs to get the scope back far enough for proper eye relief. This may only be an issue for guys with a short LOP. This puts the distance between center of scope and center of barrel at about 2.5 inches. The gun shoots great and I would highly recommend EGW bases wherever you can.
Reviewed by CumminsConductor1@yahoo.
10/21/2015 - 05:08:28 PM
Great product from EGW! Savage 220 is super accurate and the cheap mounts others make just don't cut it. This mount fits perfect to the receiver as if it was installed from the factory. I highly recommend this for any 220 owner.