Products You May Like

HD Kimber 84 (84L) Long Action Picatinny Scope Mount 0 MOA Ambidextrous $69.99
Mossberg Patriot Short Action, MVP 7.62 Picatinny Rail 20 MOA $39.99
Remington 783 Short Action Picatinny Rail 0 MOA $39.99
HD Remington XP/XR 100, 7 4-Hole Picatinny Rail Mount 0 MOA $59.99
Winchester 52, Kimber 82C, 82G, Anschutz 64 Picatinny Rail 20 MOA $39.99
Winchester 70 WSM Picatinny Rail 20 MOA $39.99
Steel HD Howa 1500 / Wby Vanguard Short Action Picatinny Rail Mount 20 MOA Ambidextrous
Click to enlarge

More images

Click to enlarge

Steel HD Howa 1500 / Wby Vanguard Short Action Picatinny Rail Mount 20 MOA Ambidextrous

Product #: 86402
Price: $119.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined From: 4140 Carbon Steel
Finish: Parkerized
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
Center Spread: 3.886"
Overall Length of Mount: 6.670"



Standard vs. HD rails


These mounts sit at about .35" high. Measurements may vary depending if the firearm has a stepped receiver. Our .35" measurement is typically from the highest point on the receiver.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Howa/Vanguard short action calibers:
.223 Rem.
22-250 Rem.
.243 Win.
6.5 Creedmoor
7MM Rem. Mag.
308 Win


Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write a review.
Reviewed by Athompson30
01/21/2019 - 09:09:51 AM
Amazing mount, but heed this warning...
I bought this mount a few weeks ago and mounted it last week. I did everything exactly the way you're supposed to.
The mount itself is laser straight, exactly what I ordered, and works perfectly with my Badger steel rings. It's amazing.
HOWEVER, if you buy a mount from EGW, DO NOT use the torx bit they have provided to install your mount. Use one of higher quality, because you will panic just as I did when it feels like you have stripped a screw when in fact you have rounded the torx bit smooth.
If I were to make a recommendation to EGW: Don't even bother putting a torx bit in the package. Save yourself the 5 cents per package and just remove it, because they're junk. Keep up the amazing work on the products you actually DO make, though. Bravo.