Products You May Like

HD Kimber 8400 (8400 Magnum) Long Action Picatinny Rail Scope Mount 20 MOA Ambidextrous $69.99
Silver Ruger 10/22 Takedown Picatinny Rail 10 MOA $34.99
HD CZ 550 Standard Action Picatinny Scope Mount 0 MOA $89.99
Steel HD Savage Long Action Round Back Picatinny Rail Scope Mount 0 MOA Ambidextrous $119.99
Swedish Mauser M96 Small Ring Military Action UNDRILLED Picatinny Rail 20 MOA $39.99
Winchester 70 Long Action & All Pre 64 Model 70s Picatinny Rail 20 MOA (also fits Marlin XL7) $39.99
Tikka 695 Picatinny Rail 20 MOA
Click to enlarge

More images

Click to enlarge

Tikka 695 Picatinny Rail 20 MOA

Product #: 44042
Price: $39.99

Purchase

In Stock
No Thanks
30 MOA (+$25.00)
40 MOA (+$25.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Center Spread: 4.035"
Overall Length: 7.458"



Standard vs. HD rails


Our Tikka 695 mount is made specific to the gun.

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


This mount is available with a 0 or 20 MOA. Please see our FAQ section for more detailed information on MOA.

Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.