Products You May Like

Winchester 52, Kimber 82C, 82G, Anschutz 64 Picatinny Rail 20 MOA $39.99
Savage Round Back Short Action Picatinny Rail 0 MOA $39.99
Tikka 595 Picatinny Rail 0 MOA $39.99
Savage B.Mag Picatinny Rail 20 MOA $39.99
Savage B17, B22, B22LR Picatinny Rail 0 MOA $39.99
HD CZ 452, 453, 511, 512 3/8 Picatinny Rail Scope Mount 0 MOA $89.99
Silver Tikka T3 Picatinny Rail 20 MOA
Click to enlarge

More images

Click to enlarge

Silver Tikka T3 Picatinny Rail 20 MOA

Product #: 44003
Price: $44.99

Purchase

In Stock
No Thanks
30 MOA (+$20.00)
40 MOA (+$20.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
Standard 6-48 X 1/4"
Metric 3.5 X .5"
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included



Standard vs. HD rails

Our Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite Rifles. The T3X rifle has an extra hole in the receiver that our rail covers up and does not use. 

Compatible with: 
T3x Superlite Camo
T3x Superlite
T3x Compact
T3x Lite
T3x Lite Stainless
T3x Compact Tactical Rifle
T3x Varmint
T3x Laminated Stainless
T3x Forest
T3x Hunnter Stainless
T3x Hunter
T3 Hunter
T3 Laminated Stainless
T3 Varmint
T3 Super Varmint
T3 Varmint Stainles
T3 Compact Tactical

Modification to the front of the mount is required to fit the Tikka T3X Tac A1. The mount must be cut down to fit behind the forend. Our mount is not the same height as the forend.

Our mount does not have a recoil lug.

This mount is available with a 0 or 20 MOA.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Our Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. Your gun may require metric screws. If you require metric screws, please select that option. We are happy to provide whichever size screws you need.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.