Products You May Like

Marlin 917, 982, XT-17, XT-22 Picatinny Rail 20 MOA $39.99
Scope Mount Extrusion 24" (.650") $19.99
HD Savage Round Back Short Action Picatinny Rail Scope Mount 40 MOA Ambidextrous $69.99
HD Winchester WSM Scope Mount 0 MOA Ambidextrous $69.99
HD Winchester WSM Scope Mount 20 MOA Ambidextrous $69.99
Remington XP, XR 100, Model 7 4-Hole Short Action Picatinny Rail 20 MOA $39.99
Winchester 52, Kimber 82C, 82G, Anschutz 64 UNDRILLED Picatinny Rail 0 MOA
Click to enlarge

More images

Click to enlarge

Winchester 52, Kimber 82C, 82G, Anschutz 64 UNDRILLED Picatinny Rail 0 MOA

Product #: 42703
Price: $39.99

Purchase

In Stock
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Overall Length: 5.882"

Our Winchester 52 mount is made specific to the gun.
This mount is available in 0, 20 and Negative 20 MOA.

This mount fits:
Kimber 82C
Kimber 82G
H&R M12
Winchester 75
BSA Martini Mk2
BSA Martini MK3
Anschutz 64
Remington 37

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750? , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. Please see our FAQ pages for more information on MOA. You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order). 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).



Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.