Products You May Like

Swedish Mauser M96 Small Ring Military Action Picatinny Rail 20 MOA $39.99
HD Savage Round Back Long Action Picatinny Rail Scope Mounts 30 MOA $69.99
Browning A-Bolt Long Action Picatinny Rail 20 MOA $39.99
HD Montana Rifle 1999 Short Action 20 MOA Picatinny Rail Scope Mount $69.99
Ruger American Long Action Picatinny Rail 20 MOA $39.99
HD Ruger American Long Action Scope Mount 20 MOA Ambidextrous $69.99
Winchester 70 WSM Picatinny Rail 20 MOA
Click to enlarge

More images

Click to enlarge

Winchester 70 WSM Picatinny Rail 20 MOA

Product #: 42202
Price: $39.99

Purchase

In Stock
No Thanks
30 MOA (+$20.00)
40 MOA (+$20.00)
No Thanks
Torx Screws Only (+$3.00)
Torx Bit and Screws (+$4.00)
E-mail to a friend

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Center Spread: 3.514"
Overall Length: 6.670"



Standard vs. HD rails

This mount comes standard with a bevel on both sides making it ambidextrous.


Our Winchester 70 mounts will work for any short action, long action, WSM or WSSM mount. 
*The Winchester Coyote edition chambered in .243 will require our WSM mount.* 

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

These mounts are available in 0 or 20 MOA. 

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order). 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Product Reviews

Login or Register to write the first review.