Products You May Like

EGW HD 30 MM Tactical Aluminum Rings .990" $124.99
HD 34MM Tactical Rings OPS2 $174.99
EGW HD 30 MM Tactical Aluminum Rings 1.275" $124.99
EGW HD 30 MM Tactical Aluminum Rings .850"
Click to enlarge

More images

Click to enlarge

EGW HD 30 MM Tactical Aluminum Rings .850"

Product #: 61100
Price: $124.99


In Stock
No Thanks
Torx Screws (+$4.00)
E-mail to a friend


Items Necessary for Installation:
T15 Wrench - for the ring cap screws (included)
1/2" Wrench or Socket - for the crossbolt nut (not included)

Torque Specs:

Ring Caps: 15 in/lbs
Ring Crossbolts: 65 in/lbs

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high.

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to

Product Reviews

Login or Register to write a review.
Reviewed by Jerry818
Jerry818 bought "EGW HD 30 MM Tactical Aluminum Rings .850"" on our website
08/28/2018 - 04:02:47 AM
These rings are awesome. I used these on a Remington 700 Police .308, with a Vortex Viper PST gen II 5x25x50. I mounted them on an EGW 20 MOA HD rail part number 80002. This set up kept the scope close to the barrel with the perfect clearance. Tolerances between the rings and rail were tight with no slop!!! Precision and high end all the way. Highly recommended. I will shop EGW again.
Reviewed by willkomm
01/06/2015 - 11:00:56 AM
Perfect for 50mm Objective
The .850, 30mm scope rings are perfect for a Leupold 6.5-20 x 50mm scope! I also used the HD Aluminum mount (7075). This combination mounted the scope as close to the barrel as I can get with the lense cover on. I have approximately 1/8" to 3/16" of an inch clearance from the Heavy 20" barrel on a Remington 700 SPS Tactical, .308. I am very happy with this set up!