Undersize Reloading Dies

...and value; dramatically better than anything else I've used in 20 years of reloading. Reliable, inexpensive, and delivers just as promised. A hidden benefit is the way the Lee decapping stem works: far less inclined to break or bend if an obstruction is encountered in the case (a small pebble, for instance, that became lodged there and preload cleaning/tumbling did not remove; I bought 10 replacement stems, and have yet to need one). Even on calibers where bulging is generally less of a problem, I've replaced all my sizing/decapping dies with these EGWs - they're just that much better. And before you ask: it 'rehabs' field brass beautifully, even those fired in older style, not-fully-supported Glock chambers. You'll often get a slight 'smile' in the web, but this is usually a visual artifact only: most will easily pass a TIGHT chamber gauge and survive literally dozens more uses, if they don't pass a gauge check, they aren't safe anyway and should be pitched. BUY THEM!

Before this die I would have about 10% of my handloaded ammo that would not fit into my case gauge. This was after loading them with a standard size die and then finishing them with the LEE Factory crimp die.
Since using this die I have had exactly 1 cartridge that would not fit nicely in my case check gauge.
I love it.!

I have used the 38 super version of this die for the last 4 years now. I have not had a jam due to a shell not being sized properly since.